How To Store A Chainsaw Without Oil Leaching
Share it
If you notice your chainsaw leaking oil after usage, you have likely wasted to worth of chainsaw oil to keep it working well.
To avoid the extra costs of oil and repairs, you should learn how to store a chainsaw without oil leaking from the machine. Our engineers will show all your options in this guide.
Why Does My Chainsaw Leak Oil When Stored?
The oil in your chainsaw may be leaking for several different reasons. Some leaks are maintenance-related while others result from improper oiling.
Overfilling the oil tank can cause oil to escape through the port. Most chainsaws of a specific model have a maximum fill line on your reservoir; filling it to just below that line is safest.
You can keep your saw free of oil leaks while using it and when you put it away. Problems with the port plug are another common cause of oil leaks and are usually easy to rectify. Each time you change the oil, you must ensure the plug is securely fastened each time you change the oil.
Leaks are more likely to occur when in use due to mechanical issues than when in storage.
However, you should still be aware that other components of the oiling system, including pumps, can fail and create leaks.
Look for your manual model if you need guidance on good cleaning and maintaining your chainsaw body. You can temporarily remove the chain, case, and spark plugs. Then, use a steel-bristle brush to clean the oil ports.
The oil reservoir must be disassembled and cleaned or replaced if it becomes clogged.
How Do You Store A Chainsaw So That It Doesn’t Leak?
: Check The Oil Level Closely
Overfilling a reservoir can cause oil to leak as it expands or contracts with its surrounding temperature.
Your reservoir should not be filled to the maximum level shown on the container. It is best to keep the chainsaw’s reservoir below its maximum level when it is being stored.
If you only fill the tank when youre about to use it, you wont have to worry about it leaking while its in use or in storage.
: Check If The Plugs Are Secure
Before you put away your chainsaw, make sure that you have secured the rubber plugs to the oil ports.
Plastic and rubber plugs wear over time but are easy to replace. You may not be able to find all brands of fill-plugs in your local stores.
: Store The Chainsaw Vertically
Many have wondered if they can position a chainsaw in a vertical position. Long-termstorage of chainsawsin a vertical way, typically by the handle, increases the risk of oil and gasoline leaking uncontrollably from the saw and down the bar.
To prevent this from happening, there are two options. First, eliminate the potential for leakage by completely draining the fuel, oil, and chain oil from the saw before hanging it over an extended period.
You could hang it, and then come back in a few minutes to empty the oil and fuel tanks. The tanks‘ pressure will build up over time and spillage will occur.
To release pressure buildup, you can burp the tank. Do this by gently twisting the valve apart to release the gas to prevent the contents from escaping.
: Hang The Chainsaw By The Handle
This is an easy and practical way to store chainsaws. To store your firewood saw, simply hang it from a hook in the wall or other suitable location by the back handle, the one with the trigger that is attached.
However, you should know the risk of an oil leak flowing down the chainsaw bar if you hang it in this way.
You can either empty the fluids before you store them, or burp the tanks once they have been hung for a brief time. Its a seal that can stop oil from leaking.
Hang The Chainsaw At The Brake Stop
Instead of securing the saws handle to the back of the blade, you can use this method instead.
You can reduce the risk of fluid leakage from your chainsaw by storing it with the brake stop handle (the one that is on top of the saw) instead of the rear handle.
Conversely, brake handles arent the most sturdy parts of a chainsaw. Experts recommend limiting the use of brake handles to smaller saws. Extra force could cause the brake to stop, crack or become broken.
: Avoid Laying It On Its Side
There areports on the chainsawsleft side for the gasoline and oil tanks. Oil can be dripped onto the chain rollers by a hole in the oil tank, which keeps the chain and rollers well-oiled.
Avoid storing fuel or oil on either side. Consequently, the likelihood of a leak is higher than if you were to set it down on the ground simply.
If your chainsaw must be stored on its side, make sure the bar is flattened on a surface or floor. The oil reservoir can also be empty.
Additional Preventative Measures + Short-Term Storage Tips
Keep your chainsaw dry and in a cool place. Oil thickens in colder temperatures, making it less likely to leak easily.
When a chainsaw is stored in a warm room or somewhere with heat sources, it can also increase the likelihood of a leak if one already exists .
Its also a good idea to place a towel or a plastic bag beneath your chainsaw when storing it to absorb the tiny amount that may drip out. If any oil continues to leak out, even a tiny amount, it could be an indication that your chainsaw is overloaded or in dire need of repair.
These are some mechanical tips and tricks that you can use for short-term storage.
- The use of a sheath or cover is an additional viable alternative.
- Before putting the chainsaw away, give it a thorough cleaning.
- For storage of your chainsaw, a cool and dry place is best.
- It is not necessary to use silicone spray to stop leaks.
- Use your chainsaw more frequently.
- You can stop the chain leaking by storing it in a bag.
- It is not necessary to use silicone spray to stop leaks.
- Keep your chain properly oiled.
Inspect The Bar Guide
Check the condition of your guide bar if the chainsaw is leaking oil. Closely inspect if a broken part does not leak bar oil. The guide can be tossed out and a new one installed if any suspicious behavior is detected.
Check For Fluid Buildup
No matter what brand you have, ensure that the oil system can hold enough oil. You can transfer energy to other parts of your saw when you use it, which could lead to pressure buildup in the oil tank.
Because of this pressure, the fluid inside the fuel tank must escape, causing your chainsaw to leak. It is best to leave the fuel tank cover slightly open if you intend to use the saw for a long time. The situation needs a minute or two to settle back down to normal.
After that, there should be no reason to worry. Secure the valve again.
The Rubber Ring Is Worth A Look
If the oil leakage persists after trying the solutions above, the rubber ring may be defective. Located between the chain and the oil storage tank, it plays a vital role in the overall process.
Sometimes, excessive pressure can cause seepage. You should replace the rubber ring if this occurs.
It can be replaced, but be careful not to tear the rubber seal! Remember not to over-tighten it too.
Keep Your Chain Clean
Keep the chain clean consistently because it helps keep it clean by keeping dirt and debris from getting caught in the teeth. You must monitor the chain’s progress every step of the way.
Also, inspect the oil tank air vent, oil pump, as well as the outlets near the clutch. If any of these obstructions occur, oil pressure could build up within the tool, causing oil leakage from the lines.
Any type of chainsaw oilthat accumulates inside the chainsaws body during storage could leak out via any openings in the housing.
Conclusion
Now that you know how to store a chainsaw without oil leaking, it all boils down to taking the necessary precautions.Put the bigger chainsaws away on the floor on a shelf and the smaller ones on the wall so you cant lose them.
Always drain the chainsaws oil before putting it away in a dry place. The plugs must be securely fastened after each usage and before being stored.
